Are you wondering how to get the most mileage out of your waves (you want your perfect curls to last forever—we feel you!), avoid clamp marks, or achieve the most voluminous curls using your Beachwaver S-Series iron? Below, we answer all your burning questions about how to use (and get the most out of!) your Beachwaver iron.

1. How do I choose the right size Beachwaver for me?

Do you have a cute bob, lob or shorter-than-shoulder-length hair? The Beachwaver S.75’s ¾-inch barrel is perfect for you. It can also be used to create super textured waves on long hair, or to enhance your natural curl!

Our classic Beachwaver S1 is great for all hair types and lengths. This 1-inch barrel gives you those just-came-from-the-beach waves. P.S. – Start here if this is your first Beachwaver buy!

If you have shoulder-length to long hair, or medium to thick hair, try the Beachwaver S1.25. This bigger, 1¼-inch barrel will give you relaxed waves—like you’ve just gotten a blowout!

Wrong!

Right!

5. What speed should I use?

Slow Speed

Use the slow speed if you’re a Beachwaver beginner. When using the slow speed, you have more control over the rotation, giving you a chance to get used how the Beachwaver works!

The slow speed is also perfect for short hair, baby hairs, and hair close to your scalp.

Fast Speed

Once you become comfortable curling your hair with the Beachwaver, switch to the fast speed! Faster speed = faster results (especially on extra-long hair!)

6. How should I section my hair when curling?

Follow these easy steps to master sectioning your hair! Bring all your hair forward, then section each side of your head so you have a top and a bottom section. Clip the top section up and start by Beachwaving the bottom section. Once the bottom section is Beachwaved, release the top section. Repeat on the other side. This way, you will never have to curl the “back” of your hair!

7. How do I change the direction of my curls?

If you’re a beginner, we always recommend starting by curling everything away from your face. To do this, start with the clamp facing forward. Clamp the end of your hair and press the outer arrow to rotate away from your face.

Once you’ve graduated to pro Beachwaver status and you want to try curling in alternating directions (for a more textured look):

Start by following the steps above.
On every OTHER curl, start with the clamp facing backward (instead of forward). Clamp the end of your hair and press the outer arrow to rotate toward your face.

8. How can I make my curls last longer?

Tip 1: After you’ve curled your hair, wait until your curls are completely cool before you run your fingers or a brush through it.

Tip 2: After you release each curl, slide your finger through the middle, and roll the curl into an O-shape all the way up to the base. Grab a hair pin and pin the “O” at the root. Allow it to curl completely before removing the pin.

Tip 3: Don’t forget to use your Great Barrier Heat Protectant Hairspray to help make your curls last for days!

9. How do I get a beachier wave vs. a bouncy wave?

For beachy, relaxed waves:

Clamp your hair, leaving about an inch or two of the ends out.

For bouncy waves:

Clamp closer to the ends of your hair. Once you have rotated the Beachwaver one time, slightly open the clamp and slide the iron down closer to the end, then rotate the Beachwaver all the way up. Hold the Beachwaver at a slight angle to give you more volume and bounce.

10. How do I create volume?

Maximize your volume by taking a section of hair and lifting it up, then placing it into the clamp at an angle. Hold at an angle for 3 to 4 seconds and release. Va va voom!

Styling with the Beachwaver S-Series: FAQs